Skip to main content

Disperse SOL

Fund multiple wallets at once with precise control. Use it to spread SOL evenly or with controlled randomness.

Access​

User Menu → Fund

Target Selection​

Before choosing a dispersion mode, you select which wallets to fund:

  • Selected Wallets - Disperse SOL only to wallets currently selected in the Wallets Panel. Requires at least one wallet selected.
  • All Active Wallets - Disperse SOL across all active wallets (Dev + Trade wallets).

Dispersion Modes​

Simple Mode

  • Single-layer distribution.
  • Fast and efficient.
  • ⚠️ Detectable by BubbleMaps.
  • ✅ Free of charge.

Hard Mode

  • Multi-phase distribution across wallets with added randomness and obfuscation.
  • ✅ Designed to be undetectable by BubbleMaps.
  • ✅ Free of charge.

When you select Hard mode, you choose a speed:

  • Quick - Best for topping up existing clean wallets. Typically completes in 1–2 minutes.
  • Slow - Best for preparing new wallets that have no prior activity. Uses longer delays (20–21 min per wallet) to appear more natural on-chain. ETA scales with wallet count (e.g., 5 wallets ≈ 100–105 min, 10 wallets ≈ 200–210 min). You can close the modal and receive a Telegram notification when complete.

CEX Mixer

  • Routes SOL through centralized exchanges before distributing to your wallets.
  • ✅ Multiple CEX options - choose your preferred exchange and compare rates.
  • ✅ High privacy - funds are mixed via exchange flows.
  • ⚠️ Minimum 0.1 SOL per wallet (vs 0.01 for Simple/Hard).
  • Processing may take longer than Simple or Hard mode.
  • Exchange fees apply - quoted rates are indicative; actual output may vary.

When you select CEX Mixer, you choose a mode:

  • Standard - Immediate execution across all wallets.
  • Stagger - 30–60 second delay between each wallet. Useful for larger distributions to spread out CEX deposits over time.

Steps to Disperse​

Simple / Hard Mode

  1. Open the Fund panel.
  2. Choose Selected Wallets or All Active Wallets as the target.
  3. Choose Simple or Hard mode (Hard: select Quick or Slow speed).
  4. Enter Total SOL and Min / Max per wallet values. Target wallets come from your selection in step 2.
  5. Confirm terms and generate dispersion keys.
    • Download and save keys securely (see Secure Download).
  6. Fund the relay wallet as instructed - use a self-custody wallet (e.g., Phantom or Solflare) to send funds to the relay.
  7. Monitor progress in real time on the status panel.

CEX Mixer

  1. Open the Fund panel.
  2. Choose Selected Wallets or All Active Wallets as the target.
  3. Choose CEX Mixer mode, then Standard or Stagger (30–60s delay between wallets).
  4. Enter Total SOL and Min / Max per wallet (min 0.1 SOL per wallet).
  5. Select your preferred exchange from the quoted options (rates may vary).
  6. Send SOL to the deposit address shown - use a self-custody wallet.
  7. Monitor progress - processing may take longer than Simple/Hard.
info

Simple/Hard: If dispersion fails, you can reclaim your funds from the downloaded private keys. More on that in Claim SOL.

CEX Mixer: Uses a deposit address; no private keys to download. Contact support if issues arise.

Cancel & Refund​

  • You can cancel a dispersion at any time (where applicable).
  • Simple/Hard: If the relay wallet still holds funds when you cancel, PumpKit will attempt an automatic refund.
  • CEX Mixer: Cancel behavior may differ - check the status panel for details.
  • The refund result and details are shown in the dispersion status panel.

Secure Download (Simple / Hard)​

  • Dispersion keys are delivered via a secure, one-time download link.
  • The link is tied to your current session/IP and expires quickly - it cannot be re-issued.
danger

Simple/Hard: Do not proceed with dispersion unless you have saved the generated keys. Without them, you cannot access the generated wallets - and if dispersion fails, funds may be lost permanently.

info

CEX Mixer does not use private keys - you send to a deposit address. No key download step.

💡 Notes & Tips​

  • Selected Wallets lets you top up only the wallets you've chosen in the Wallets Panel; All Active Wallets funds every Dev and Trade wallet.
  • Simple Mode if speed is more important than privacy.
  • Hard Mode for stealthy distributions. Use Quick for existing wallets, Slow for new wallets that need natural-looking activity.
  • CEX Mixer for maximum privacy via exchange routing - choose Standard for speed or Stagger (30–60s between wallets) for larger distributions. Compare exchange rates before confirming.
  • Use a self-custody wallet (Phantom / Solflare) to fund the relay or deposit address - custodial transfers may complicate refunds.
  • CEX Mixer requires 0.1 SOL minimum per wallet - plan your total amount accordingly.